Magnetoresistance of Fe3O4/Au/Fe3O4 and Fe3O4/Au/Fe spin-valve structures

A detailed study of the in-plane magnetotransport properties of spin valves with one and two Fe₃O₄ electrodes is presented. Fe₃O₄/Au/Fe₃O₄ spin valves exhibit a clear anisotropic magnetoresistance in small magnetic fields but no giant magnetoresistance (GMR). The absence of GMR in these structures is due to simultaneous magnetization reversal in the two Fe₃O₄ layers. By contrast, a negative GMR effect is measured on Fe₃O₄/Au/Fe spin valves. The negative GMR is attributed to an electron spin scattering asymmetry at the Fe₃O₄/Au interface or an induced spin scattering asymmetry in the Au interfacial layers.     

Formation, isolation and characterization of an AB-biaryl atropisomer of oritavancin

Oritavancin is a semi-synthetic glycopeptide antibiotic which is structurally related to vancomycin. When oritavancin bisphosphate is dried in vacuo with heat, a new compound forms. This new compound is stable only in the solid state and reverts to oritavancin in solution. Highly enriched samples of this compound were obtained by preparative HPLC and the structure of this compound was elucidated by using one and two-dimensional (¹H and ¹³C) NMR spectroscopy in conjunction with computer-assisted molecular modeling. It has been determined that oritavancin adopts a conformation similar to that of vancomycin in solution, while the new compound is the unnatural R-AB-biaryl atropisomer of oritavancin. This is the first observation and isolation of an AB-biaryl atropisomer in an intact member of the vancomycin family of glycopeptide antibiotics.     

Vinyl‐type polymerization of norbornene by nickel(II) bisbenzimidazole catalysts

Novel nickel(II) bisbenzimidazole complexes were prepared via a three‐step synthetic procedure consisting of aniline/diacid condensation, ligand N‐alkylation, and metal complexation. The complexes were characterized by X‐ray crystallography and found to possess a pseudotetrahedral geometry. Upon activation with methylaluminoxane, these nickel bisbenzimidazoles did not polymerize simple olefins (e.g., ethylene, propylene, and 1‐butene) but were found to carry out the rapid and efficient polymerization of norbornene. The polynorbornene products were characterized by gel permeation chromatography/light scattering, ¹³C NMR, and IR, and their Mark–Houwink and dn/dc parameters were determined. The molecular weights of the polynorbornenes were very high (weight‐average molecular weight = 587,000–797,000 g/mol). ¹³C NMR suggested that the polymerization occurred via vinyl addition (i.e., a 2,3‐linked polymer); no ring‐opened product was observed. Thermogravimetric analysis indicated that the polynorbornenes were stable up to 400 °C under nitrogen. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2095–2106, 2003     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

A comparison of a theoretical model for quasi-statically and dynamically induced environmental vibration from trains with measurements

This paper presents comparisons between a theoretical ground vibration model and measured data at three sites. The model, which is briefly outlined here, encompasses both the quasi-static and dynamic mechanisms of excitation. The vertical dynamics of a number of vehicles travelling at a constant speed on an infinite track are coupled to a semi-analytical model for a three-dimensional layered ground. This model is also used to demonstrate the roles of the two components of vibration at different frequencies and for train speeds below and above the lowest ground wave speed. It is found that, in most practical cases, the dynamic component gives rise to the higher level of vibration.     

Improvements to air mass calculations for ground-based infrared measurements

High-resolution ground-based infrared solar spectra are routinely recorded at the Network for the Detection of Stratospheric Change (NDSC) stations. These data sets play a key role in providing a long-term record of atmospheric composition and their links to climate change. The analysis of observed infrared spectra involves comparison to a computer-modeled atmosphere where knowledge of the air mass distribution is an essential component. This note summarises improvements made to an existing and widely used computer code (FSCATM) to perform refractive ray-tracing and calculation of the air mass distribution. Changes were made towards higher vertical resolution in the troposphere and increased numerical precision. The revised FSCATM improves the analysis of infrared spectra mostly through the more accurate representation of the temperature profile. Air mass differences with respect to earlier versions are documented and are typically <0.7%, exceptions being extreme cases of inversion layers. The current version provides ray tracing and air mass calculations for any terrestrial observation site. The output files are reported in a format compatible with the SFIT and SFIT2 retrieval algorithms, which are widely used for NDSC infrared atmospheric studies. The improved computer code, documentation, reference profiles, and test cases are available electronically.     

A comparison of spin relaxation and local motion between symmetrically and asymmetrically ring-substituted bisphenol units in dissolved polycarbonates

Carbon-13 and proton spin-lattice relaxation times were measured at two field strengths on solutions 10% by weight of two polycarbonates in C₂D₂Cl₄ from ?20 to +120°C. The first polycarbonate is an asymmetrically substituted form with one chlorine on one of the two phenylene aromatic rings of the bisphenol unit, whereas the second polycarbonate is symmetrically substituted with two chlorines on each of the two rings. The nuclear spin relaxation data are interpreted in terms of several local motions likely in these polymers. Segmental motion was described by the Hall–Helfand correlation function. Segmental motion in the monosubstituted polycarbonate is somewhat slower than in unsubstituted polycarbonate, whereas segmental motion in the tetrasubstituted polycarbonate is considerably slower. Phenylene ring rotation is observed in unsubstituted polycarbonate and in the monosubstituted polycarbonate above 40°C. Below 40°C in the monosubstituted species, and at all temperatures in the tetrasubstituted species, ring rotation is replaced by ring libration as the predominant motion contributing to spin lattice relaxation. In addition, the rotational motion of the two types of rings in the asymmetric monosubstituted form are very similar although not identical. The substituted ring is slightly less mobile than the rings of unsubstituted polycarbonate. This indicates a strong coupling of ring motion, although the coupling leads to less than synchronous motion. Methyl group rotation is present in both polymers and is little affected by the various structural modifications.     

Intramolecular motion and isotope effects in muonium‐substituted chloroalkyl radicals

Muon irradiation of pure liquid 3‐chloropropene, CH₂=CH-CH₂Cl, yields a primary radical, \dot\mboxCH₂-CHMu-CH₂Cl, and a secondary radical, MuCH₂-\rm\dot\mboxCH-CH₂Cl. 2‐methyl‐3‐chloropropene yields only the tertiary radical, MuCH₂-\rm\dot\mboxC(CH₃)-CH₂Cl. These three chloroalkyl radicals have been characterized by μSR and μLCR, and the hyperfine coupling constants (hfcs) have been determined over a range of temperatures, either in the pure liquid precursor or in concentrated solution. The temperature variation of the hfcs has been analyzed to obtain estimates of the barrier to internal rotation about the C_\alpha-C_\beta axis for various alkyl groups, and also their minimum energy conformations, i.e. their orientations with respect to the axis of the 2p_z orbital of the unpaired electron. The tertiary radical is particularly interesting because all three methyl‐like groups, -CH₃,-CH₂Cl and -CH₂Mu, are represented. The results can be compared to electron spin resonance data for analogous radicals, to provide information on the effects of Mu substitution for H. This revised version was published online in August 2006 with corrections to the Cover Date.     

Radio-Frequency Hexamethyldisiloxane Plasma Deposition: A Comparison of Plasma- and Deposit-Chemistry

This study reports on the effect of input power to hexamethyldisiloxane (HMDSO) plasmas. The power dependence of the plasma-phase species and of the surface chemistry (of the deposits) has been investigated. Neutral and positive molecular species were detected within the plasma using mass spectrometry (MS). Secondary ion mass spectrometry (SIMS) was used to probe the molecular structure of the deposits. The elemental composition of the surface was determined by XPS and the deposition rate was monitored using a vibrating quartz crystal microbalance. Neutral and cationic molecules of mass greater than HMDSO were detected in the plasma. Their formation through ion-molecule reactions is proposed. Changes in the relative concentration of plasma-phase species follow those seen in molecular species detected at the deposit surface. Thus, we believe that the molecular structure of the deposits can be related to the species present in the plasma. While traditionally the dominant mechanism in deposit formation is assumed to be free radical combinations, we propose other possibilities involving cations with the aim of putting forward a new perspective on plasma polymerization mechanisms and thereby stimulating discussion.